SINTERIT Lisa Pro User Manual page 36

9. A message PRINT BED MIGHT NOT HAVE
BEEN CLEANED AFTER LAST PRINT will
appear. All remaining powder from print
chamber should be removed.
10. All remaining powder from PRINT BED should
be placed into the OVERFLOW BIN gap.
Precisely clean the PRINT BED from the
remaining unsintered powder including the
BEDs surroundings.This can be done with the
use of a spatula.
11. Ensure that the movement path of the
RECOATER is not obstructed one more time
and remove all objects from the print chamber.
Confirm by clicking DONE button.
After cleaning operations are finished, confirm
by clicking DONE.
12. Dutifully clean all
powder from the surroundings. All remaining
powder should be placed into OVERFLOW BIN
gap. Confirm operation by clicking DONE.
13. Remove the powder from the OVERFLOW BIN.
Transfer it to the container in which you will mix
the powder from the printer, with the FRESH
POWDER later (to refresh the used powder and
prepare it for the next print).
14. Place the OVERFLOW BIN. back in its place.
15. Confirm operation by clicking DONE and close
the lid.
35
the remaining unsintered
CAUTION!
Beware of sharp edges.
Image 47. Clean PRINT BED screen 2.
Image 48. Removing powder from PRINT BED
Image 49. Clean PRINT BED screen 3.
Image 50. Clean PRINT BED screen 4.
Image 51. Clean OVERFLOW BIN screen.
​
Sinterit Lisa PRO USER MANUAL
to OVERFLOW BIN.