Preparing Of The Machine - SINTERIT Lisa Pro User Manual

A. Preparing of the machine:
1. Remove the key and press the safety button. Remove the power cord.
2. Remove the LASER's PROTECTION GLASS and wrap it in a bubble wrap. Put the
glass in a box outside the machine.
3. Place the bubble wrap in the upper flap to secure the laser module and close the
printer's lead.
4. Manually move the RECOATER to the center of the print chamber and secure it with a
bubble wrap (the foil should be on the PRINT and FEED BEDS).
5. Be careful not to apply too much foil, and not to damage the infrared heaters in the
flap when closing.
6. Close the machine.
Attention!
Repack the product in the original manufacturer's packaging, complete with
the inner cushioning material.
B. Packaging:
1. Remove the printer's front panel and place it on a flat surface.
2. Insert the bubble wrap gently into the gas chamber, watch out for the wires. Close the
chamber.
3. Carefully insert the printer into the flight case.
4. Put the front panel under the lid of the flight case and close the case.
5. Wrap the entire case with stretch foil.
6. Mark the top of the package, stick "Fragile" stickers on it.
Attention!
If the product has been shipped on a pallet or in a flight case package, it
should be returned in the same way.
C. Packaging if the original packaging is no longer
available or damaged:
1. Wrap the LISA PRO Printer in multiple layers of bubble wrap so that a cushioning
layer with at least 6[cm] of thickness protects the item.
2. Source a strong outer box which is at least 14[cm] larger than Sinterit LISA PRO
Printer in all dimensions. This box should be strong enough to protect the printer. We
suggest a dual-wall box.
3. Place 6[cm] of filler material (wrinkled wrapping paper or polystyrene foam) on the
base of the outer box before placing the Sinterit LISA PRO Printer (wrapped in bubble
wrap) inside.
4. Make sure the printer sits straight and the flap facing up!
5. Place the LISA PRO Printer inside the outer box or flight case - centred.
50
​
Sinterit Lisa PRO USER MANUAL