Working Processes With The Materials; Supplies Information - SINTERIT Lisa Pro User Manual

12. Working processes with the materials
A. Supplies information
When working with the polyamide powder or other designated printer powder for the Sinterit
LISA PRO Printer, always wear protective kit attached to the above-mentioned device
(glasses, gloves, dust mask).
WARNING!
When working with a polyamide powder, avoid inhalation or swallowing and
contact with skin and eyes.
● Polyamide powder should be stored in tightly closed containers, in a room at room
temperature and low humidity.
● Powder should be stored out of reach of children and pets.
● If the device is not used for a long time, the powder should be stored in a sealed
package.
● When printing the smell of burning material may be emitted in intensities which do not
affect the health of users. However, in the case of long-term operation of the printer in
a poorly ventilated room, the smell may become unpleasant and irritating. Adequate
ventilation is recommended in order to create the best printing conditions.
WARNING!
Do not attempt to burn/melt polyamide powder. The resulting sparks and hot
mass can cause severe burns. Keep the polyamide powder away from fire.
STOP!
Do not dispose in municipal waste! The used polyamide powder should be
stored in sealed containers and disposed in accordance with local policy of
waste plastic material.
45
● If the PA powder is inhaled, move to a place with fresh air and gargle
thoroughly with plenty of water. If coughing develops, contact a
physician.
● If you eat a PA powder, rinse your mouth with water and drink 1-3
glasses of water to dilute stomach contents. If necessary, contact
your doctor.
● If the PA powder gets in your eyes, rinse them thoroughly with water.
In case of persisting eye irritation, contact a physician.
● When the PA powder gets in contact to your skin, wash it with soap
and water.
​
Sinterit Lisa PRO USER MANUAL