SINTERIT Lisa Pro User Manual page 26

WARNING!
Carefully read all messages displayed on the screen while preparing the
machine for printing. Skipping the described operations may result in
incorrect printing or machine failure.
First use of the printer
a. If the machine is filled with powder
for the first time, after loading the file,
a message will appear that the laser
glass needs to be cleaned. (Chapter
8, Section A).
b. After confirming that the previous
content (printouts and unsintered
powder) of the PRINT BED has been
removed and that the work space of
the RECOATER is not obstructed,
the printer will be ready for printing -
it will start the printing process by
repositioning the BEDs and the
RECOATER.
7. By clicking DONE the RECOATER and the BEDs will be repositioned. During this
operation, the height of both BEDs is set in accordance with the currently selected
printing process.
Image 23. Repositioned BEDs: PRINT BED (2) and ready to be filled with powder FEED BED (1) and the base
25
Image 22. Positioning of the BEDs and the RECOATER screens.
position for the RECOATER.
​
Sinterit Lisa PRO USER
Subsequent use of the printer
a. After confirming that the previous
content (printouts and unsintered
powder) of the PRINT BED has been
removed and that the work space of
the RECOATER is not obstructed,
the printer will be ready for printing -
it will start the printing process by
repositioning the BEDs and the
RECOATER.
MANUAL