Printing - Standard Mode - SINTERIT Lisa Shortened User Manual

3. Printing – STANDARD MODE
1. To start, click the "START NEW PRINT" button
on the LCD screen.
2. Press "UNLOCK LID" button to open the printer
Lid (Image 13).
Remember: The Lid's electrolock deactivates
for 10 seconds. After this time, it will re-
activate).
3. Softly press the Lid and then lift it.
4. Load the file to print:
a. save the file (*.scode) prepared using the
Sinterit STUDIO to a USB Flash Drive.
b. Connect the storage to the printer's USB
port , with its power turned on.
10
5. After connecting the Flash Drive into a USB
port, "LOAD FROM USB" section will be
displayed and a Flash Drive icon will appear on
the left side of sections (Image 14).
IMPORTANT!
After uploading the model to the printer's internal storage, printed projects can be chosen
from "RECENT MODELS".
6. Titles of project files will be displayed. Arrows will help to navigate through folders and files (Image 15).
7. After choosing a file, it will be loaded into the device's memory.
IMPORTANT!
A yellow triangle displayed on the side of the
screen informs about a malfunction.
Please contact the Support Team (section 7, page
15) by referring to the code displayed inside the
warning triangle and providing the serial number
of the device.
Start new print
Advanced mode
Image 14. A screen showing a USB connection to the printer.
Image 15. Loading the print file screens.
Printer lid has to be opened to operate the printer.
Unlock and open the lid.
Clean print
UNLOCK LID
About
CLICK
Image 13. Open Printer Lid.
Sinterit Lisa printer SHORTENED USER GUIDE | 7
0.0°C