Materials For Nitrogen Use; Materials In The Sinterit Lisa Printer - SINTERIT Lisa Pro User Manual

B. Materials for nitrogen use
The only material in our offer that requires using the nitrogen chamber during the printing
process is ​ P A11 ONYX​ . Its full characteristics is available at ​
The nitrogen chamber can be also used with 3rd party materials if you own Sinterit STUDIO
2019 version with open parameters feature (Sinterit STUDIO OPEN or Sinterit STUDIO
ADVANCED).
C. Materials in the Sinterit Lisa Printer
PA12 SMOOTH
● When printing using PA12 SMOOTH, the printer may become hot. Be careful and do
not harm yourself.
● During the printing process, you may watch the objects building through the top glass.
● After printing, the block in the PRINT BED is very firm, but also very powdery (all of
the unsintered powder falls down even when lightly shaken).
● Prints made from PA12 SMOOTH may take some time and effort to clean them from
the unsintered powder. Please clean them with the tools included in the set. As you do
so, next we recommend using a sandblaster or compressed air to clean areas difficult
to reach.
● Due to high temperatures, the material ageing process (degradation) occurs – there is
a need to add FRESH POWDER to the used one (from the printer, OVERFLOW BIN
and the one remaining from model cleansing). The used one must be sifted through a
sieve, then the fresh batch of powder must be added and the compound must be
blended together.
FLEXA group and TPE
● When printing using FLEXA or TPE, smoke from the melted material may appear
inside the printer.
● Due to a lower melting temperature, the visibility through the window and the camera,
is limited (the INFRARED HEATERS working with lower power do not produce enough
light).
● For FLEXA group, after printing, the block in the PRINT BED is very firm, but also very
powdery (all of the unsintered powder falls down even when lightly shaken).
● Prints made from FLEXA group (unlike those from PA group) may be easily cleaned,
using for example a paint brush (the brushes included in the set do not have to be
used). We recommend using a sandblaster or compressed air to clean areas difficult
to reach.
● FLEXA does not require refreshing – there is no need of adding new powder to the
one from the printer (unlike with the PA group). After sifting through a sieve, the entire
powder is ready to be reused.
46
w ww.sinterit.com/pa11-onyx
​
Sinterit Lisa PRO USER MANUAL