Cleaning The Surface Under The Beds - SINTERIT Lisa Pro User Manual

C. Cleaning the surface under the BEDs
ATTENTION!
Before cleaning, turn the printer off.
CAUTION!
Beware of moving parts which can crush hands.
Pay attention to the indications inside!
To facilitate cleaning of the space under the BEDs, Sinterit reinvented the front panel
assembly. Now under the panel, you will find the magnetic fasteners which allow you to
remove it fast and simple.
You will find a hollow to easily put your fingers - which will make it quicker for you to remove
it​ .
1. Lift up the panel gently, unfastening each clip one
after another.
2. After removing, put the panel on a flat, safe
surface.
3. Gently remove the powder using a brush, or
special
engines.
4. To install the panel, perform the above actions in
reverse order.
41
● The cleaning process should be carried out outside of the machine.
Image 60. The magnetic fasteners.
vacuum cleaner, minding the Beds
Image 61. Method of taking off the front
​
Sinterit Lisa PRO USER MANUAL
panel.