Parameters - Print Design Guide - SINTERIT Lisa Pro User Manual

SOFTWARE
Control software/firmware Sinterit STUDIO 2019
Operated file formats STL, OBJ, 3DS, FBX, DAE, 3MF​
COMMUNICATION
External communication USB, WiFi
SAFETY
IEC protection class Class I
Laser product class Class 1, invisible laser radiation
IMPORTANT!
Variety of powders compatible with this model of printer available on
www.sinterit.com​
LISA PRO supports all available Sinterit powders, so their use is limited only
by your version of Sinterit STUDIO 2019. More information is available at
www.sinterit.com/sinterit-studio-2019
C. Parameters - print design guide
13
OS compatibility Microsoft Windows
LCD touchscreen Capacitive, colour - 7 [in]
On-board camera Built-in
or in online store on ​
Wall thickness
The 3D model's wall must be thick enough to support the model.
We recommend with working with 0,8 [mm] for larger objects, in
smaller objects you can have a lower wall thickness of 0,4 [mm].
Embossed and engraved details - minimum detail size
Selective Laser Sintering is one of the 3D Printing processes with
the highest accuracy; up to 0,1 [mm] is enough to create clearly
visible details. If you plan to put some embossed and engraved
DETAILS, we recommend adding the minimum thickness of 0,15
[mm] and depth of 0,15 [mm].
h ttps://www.sinterit.com/shop
​
Sinterit Lisa PRO USER MANUAL
1