Initial Startup Of The Machine After Delivery - SINTERIT Lisa Pro User Manual

6. Initial startup of the machine after delivery
1. Carefully take the printer out of the protective package.
2. Use the handles placed on the printer's housing located on the front and back.
3. Because of high weight, we recommend doing following steps by at least two people.
4. Place on a stable and hard surface (ideally the target location of the printer).
ATTENTION!
The printer weighs almost 100 kg. Make sure that the furniture or surface
that you plan to place the printer on is appropriate for such load.
5. Carefully discard protective foil and paper. Remember about removing the protective
foil from the door of nitrogen chamber and from the touchscreen housing.
6. In the top cover of the Flight Case, find the printer's front panel. Lay it aside with its flat
side down until finishing the installation process.
7. Connect the power cord to the printer's power socket.
8. Switch the power switch (from "0" to "1") located on the left side.
9. Check whether the red Safety button (E-STOP) is out. If not, rotate it clockwise at a
quarter of a turn (the black flange of the button).
Image 9. Off/On key positions.
10. Place the Safety key in the ignition and turn clockwise at a quarter of a turn. After a
moment, the machine will start.
11. After switching on the Sinterit LISA PRO the startup screen will be displayed.
12. Three functions will be displayed: START NEW PRINT, CLEAN PRINTER and
ADVANCED MODE. ADVANCED MODE is also a previous software version.
13. Choose START NEW PRINT to open the printer's lid.
14. Choose an UNLOCK LID option. The lock deactivates for 10 seconds. After 10
seconds the lock will become active again.
19
Image 12. Main screen of LISA PRO and UNLOCK LID screen.
​
Sinterit Lisa PRO USER
Image 10. Initial screen of LISA PRO.
MANUAL