SINTERIT Lisa Pro User Manual page 33

5. Remove
OVERFLOW BIN.
6. Transfer it to the container in which
you will mix the powder from the
printer, with the FRESH POWDER
later (to refresh the used powder and
prepare it for the next print).
7. Place the OVERFLOW BIN back in
its place.
8. After the PRINT BED is ready to
remove the printout, the information
about refreshing of the remaining
powder will appear. The quantity of
FRESH POWDER (for PA11, PA12
and TPE) needed to be add for the
next print will be displayed on the
screen.
9. Next the system will guide you
through printer cleaning process. It
will allow
remaining powder.
32
Images 39. A correct way of taking out the prints from the PRINT BED.
the powder from
you to recover,
the
Image 40. OVERFLOW BIN cleaning screen.
all
Image 41. Correct cleaning of the OVERFLOW BIN.
​
Sinterit Lisa PRO USER MANUAL