Issu Examples For Using Install Series Commands In Standalone Mode; Feature Upgrade Example - HP 10500 Series Configuration Manual

ISSU examples for using install series commands in
standalone mode

Feature upgrade example

Upgrade requirement
As shown in
(standby MPU).
Upgrade the feature1 feature from R21 1 1 to R21 10. The two versions are ISSU-compatible versions.
Figure 45 Network diagram
Upgrade procedure
# Download the upgrade .ipe file from the TFTP server.
<Sysname> tftp 2.2.2.2 get feature1-r2111.ipe
% Total
100 256k
# Decompress the .ipe file.
<Sysname> install add flash:/feature1-r2111.ipe flash:/
# Display active software images.
<Sysname> display install active
Active packages on slot 0:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2110.bin
Active packages on slot 1:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2110.bin
# Identify the ISSU method and possible impacts of the upgrade on the device.
<Sysname> install activate feature flash:/feature1-r2111.bin slot 1 test
Upgrade summary according to following table:
flash:/feature1-r2111.bin
Running Version
Release 2110
Slot
Figure 45, the device has two MPUs: one in slot 0 (active MPU) and the other in slot 1
% Received % Xferd
100 256k 0
Average Speed
Dload Upload
0 764k 0 --:--:-- --:--:-- --:--:--
New Version
Release 2111
Upgrade Way
149
Time Time Time
Total Spent Left
Current
Speed
810k