Draining And Internal Cleaning (Machine With Drain Pump) (Option) - Wexiodisk WD-12 Installation And User Manual

Instructions for use

4.3.2 Draining and internal cleaning (machine with drain pump) (option)

When the machine is switched off, the number of baskets washed is displayed for
around 5 seconds.
Two horizontal dashes "--" are then shown in the display for 3 minutes. During this
time, the machine is still live and emptying and internal cleaning must take place
within this period. The machine then switches off automatically.
• Open the hood (5).
• Open the grid shelf (11) (option) and lock it in place with the clasp at the
back edge of the machine.
• Remove the strainers (18) and the level pipe (12).
• Press 0/1 (9) on the panel.
• Start the drain pump using button P1 (6). "dP" is shown on one display (2)
and the other display (4) shows the remaining emptying time. The water in
the washing tank is pumped to the drain. The pump stops automatically af-
ter a set time.
• Once the tank is empty, take out the pump filters (14).
• Close the hood (5).
• Press P3 (8). The display (2) shows "SC" and internal rinsing starts. The
other display (4) shows the remaining cleaning time. After rinsing is com-
plete, both the displays show two horizontal dashes "--".
• Open the hood (5). Check that the nozzles on the washing arms and rinsing
pipes (10, 17) are clean and that no objects have fallen and become lodged
in the machine.
• Clean the basket conveyor (16) and any grid shelf (11).
• Clean the pump filters (14), strainers (18), strainer plates (19) and level
pipe (12).
• Store the cleaned parts in a washing basket. Ensure that the level pipe's
rubber seal (13) does not become deformed, by allowing it to hang free.
Position of clean components after washing
WD-12
41
Rev. 2.0 (201706)