Changing The Washing Temperature And Washing Time - Wexiodisk WD-12 Installation And User Manual

Instructions for use

4.2.2 Changing the washing temperature and washing time

The factory setting for the washing temperature is 60° C (for PPE mode 53° C).
The operator can adjust the temperature to between 55 and 70° C.
The chemical washing times for each programme are set on delivery to:
•
•
•
The washing times can be adjusted between 1.0 and 6.0 minutes.
When the machine is in PPE mode, all wash programmes restart three (3) times
in a row.
Changing the values – Selecting service mode
The machine must be set to service mode when the operator needs to change a
value. This is done using the control panel. The values that can be changed flash.
The displays and buttons have different functions than when the machine is in
normal operating mode.
The panel's functions in service mode
1,0 min. (PPE 3,0 min) (programme P1)
3,0 min. (PPE 6,0 min) (programme P2)
5,0 min. (PPE 9,0 min) (programme P3)
C
1
P1
P2
P3
WD-12
2
3
4
5
6
7
8
9
12_05
32
Rev. 2.0 (201706)