Drain Connection. Machine With Emptying Pump; Detergent And Drying Agent Connection - Wexiodisk WD-4C Installation And User Manual

Installation

3.4.6 Drain connection. Machine with emptying pump

3.4.7 Detergent and drying agent connection

The drain connection (2) consists of a spiral hose. The drain is run to a washing-
up sink (A) where it must end at least 25 mm above the washing-up sink.
Ensure that the drain connection is kept in place by using e.g. cable ties in the
designated areas.
Bushing for hoses is located on the rear of the machine.
Drying agent equipment is included in the machine delivery. Connect the drying
agent injector's suction hose to the drying agent tank.
The equipment for liquid detergent is option. If the machine is supplied with deter-
gent equipment, connect the suction hose on the detergent pump to the detergent
container.
Determining the detergent and drying agent dosing is described in ADJUST-
MENT INSTRUCTIONS.
Electrical connections, see wiring diagram.
The machine can also be equipped with detergent and drying agent equipment
via "external" connections. See the wiring diagram for correct connection.
WD-4C
11
Rev. 3.0 (201308)