Wexiodisk WD-12 Installation And User Manual page 33

Combi dishwasher
Table of Contents

Advertisement

Instructions for use
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
WD-12
Symbol for washing function. After the machine is started, the symbol lights
up when the tank is full. The symbol flashes if the water level in the tank is
too low.
Display for temperature during operation. When checking and setting ref-
erence values, the display shows the number for the relevant reference val-
ue, e.g. 01, 02, 03, etc. Error messages are shown together with the display
(4).
Final rinse indicator. The symbol is lit while the machine is filling up, during
the final rinse phase and when the cleaning programme is run after a com-
pleted washing cycle. The symbol flashes if the hood is opened during the
washing cycle or if the correct rinse temperature has not been reached
when the rinsing is due to start.
Display for program display during operation. When checking and setting
the reference values, the display shows the relevant reference value.
Button for opening/closing the hood.
Button for washing program P1. When the machine is in service mode, P1
is used to show the different reference values and to reset the reference
values to the last saved values. If the machine has a drain pump, P1 is
used to start the drain pump and empty the tank after washing.
Button for washing program P2. P2 is used in service mode to increase a
reference value or jump between tables. In shut-off mode the software ver-
sion number can be displayed by holding down P2.
Button for washing program P3. P3 is used in service mode to reduce a ref-
erence value or jump between tables. P3 is used in shut-off mode to start
internal rinsing when the cleaning programme is used to clean the ma-
chine.
Button to switch the power on or off. This button is also used to reset
alarms, display the water flow to the machine and to move to service mode.
Washing arm (qty. 4), removable
Hinged grid shelf (option)
Level pipe
Rubber sleeve
Pump filter (qty. 2)
Levers (qty. 2) for selecting Normal load (-) and Heavily soiled load (+)
Basket conveyor
Washing pipe
Strainer (qty. 4)
Strainer plate (qty. 2)
29
Rev. 2.0 (201706)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents