Wexiodisk WD-12 Installation And User Manual page 41

Instructions for use
•
•
•
•
•
•
•
•
•
P0 is a pause mode and is used in the case of prolonged intervals between wash-
es in order to maintain the tank temperature. The hood must be closed. The ma-
chine does not start in P0 mode.
•
•
•
WD-12
Remove larger food particles by rinsing the items using a hand shower.
The water in the hand shower must not exceed 40° C. Place the items to be
washed in the basket.
Open the hood (5).
Select normal load (-) or heavily soiled load (+) using the levers (15).
Slide the basket into the machine. Select program P1, P2 or P3.
Close the hood (5). The machine starts washing with the selected program.
The display (4) now shows the program's remaining washing time.
The symbol (1) is lit during the washing phase.
Once the rinsing phase starts, the symbol (3) lights up. If the final rinse wa-
ter has not reached the correct rinse temperature once rinsing starts, the
symbol (3) flashes and the machine continues washing until the rinsing wa-
ter has reached the correct temperature.
The hood opens automatically once the washing cycle has finished. If the
hood is opened during a washing cycle, the machine will stop and automat-
ically start from the beginning once the hood has been reclosed.
Once the machine has stopped, the display (4) shows the last program run.
Remove the washing basket and allow the washed items to dry.
Press the programme button for the current programme once. "P0" ap-
pears on the display (4).
Press the button again to return to the current programme.
The hood must be opened and closed between each washing cycle.
37
Rev. 2.0 (201706)