Wexiodisk WD-12 Installation And User Manual page 42

Instructions for use
Washing with pre-wash machine WD-PRM 6/7 (optional)
The start-up and washing procedures etc. are the same as for standard washing.
See also the manual for WD-PRM6/7.
Checking the wash result
The items should be checked after each wash for:
PROBLEMS
Starch spots
Misting
Protein residues
Detergent residues
WD-12
CAUSES & MEASURES
• Scraping: Important to remove as much food particles as pos-
sible before washing. This also means that the water in the
machine does not need to be changed as often. Scrape better.
• Detergent and drying agent dosage: The dosing affects both
detergent and drying results of the items. The hardness level
of the water affects the consumption of detergent.Contact the
detergent supplier
• Temperatures: At incorrect temperatures the dishes will not be
clean. Contact a service technician if you need to change the
set values.
• Programme selection: Programme with too short a washing
time selected. Choose a programme with a longer washing
time.
• Cleaning the machine: Insufficient cleaning of the machine af-
fects the results of the washing. Ensure better cleaning of the
machine.
• Placing items in baskets:Incorrectly placed items can mean
that the washing water does not reach the items during wash-
ing and rinsing.
• Soaking: Items with hard dried food. Soak the dishes in water.
Do NOT use washing-up liquid.
38
Rev. 2.0 (201706)