Settings Options For Detergent And Drying Agent Equipment (Option); Ac Or 230V Ac Power Supply For Detergent And Drying Agent Dosing Via Relay 9/J71 And Relay 11/J73 - Wexiodisk WD-12 Installation And User Manual

Installation
3.6 Settings options for detergent and drying agent equipment
(option)
Check which equipment is fitted to the machine before starting work.
Switch off the power supply to the machine at the mains switch before starting
work in the electrical cabinet.
The first "24V AC or 230V AC power supply for detergent and drying agent dosing
via relay 9/J71 and relay 11/J73" explains how the contacts are supplied with the
relevant voltage.
The second section "Settings options for relay 9/J71 and relay 11/J73" describes
the different settings available and how they can be changed.
3.6.1 24V AC or 230V AC power supply for detergent and drying agent dosing
via relay 9/J71 and relay 11/J73
The detergent and drying agent dosage system can take its power from two relays
on the data card. The relays can be dead, with no power supply, or they can be
connected to a 24V AC or 230V AC supply to power the dosage system. Each
relay has a contact for connecting the equipment. Relay 9 for detergent is con-
nected via a 3-pin J71 contact. Relay 11 for drying agent is connected via a 2-pin
J73 contact.
For correct connection at X10, see the machine's wiring diagram.
230V AC equipment should not draw more than 1.5A.
24V AC equipment should not draw more than 1.5A.
The time and method for switching on the relays is determined by the settings in
the table of reference values. See the section "Settings options for relay 9/J71
and relay 11/J73".
Upon delivery, the machine 230V closing function between J71-101 and J71-102.
Upon delivery the machine 24V AC closing function between J73-C and J73-NO.
WD-12
20
Rev. 2.0 (201706)