Using The Machine; Programme Selection - Normal Load (-) / Heavily Soiled Load (+) - Wexiodisk WD-12 Installation And User Manual

Instructions for use

4.2 Using the machine

Numbers in brackets refer to the diagram in the chapter "The machine's design".
4.2.1 Programme selection – Normal load (-) / Heavily soiled load (+)
The machine can be used as a standard dishwasher for washing plates and
glassware or as a potwasher.
If using the machine for a normal load (-), the levers (15) must be at the (-) posi-
tion. The different programs are then used as follows:
The control panel has three programme buttons: P1, P2 and P3.
•
•
•
For heavily soiled loads, move the levers (15) to the (+) position.
Depending on the items to be washed, the grid shelf (11) (option) may need to be
folded down when washing heavily soiled loads.
The washing temperature and chemical washing time for each programme is set
on delivery. The operator can change these values if required.
PPE (option)
Sign on machines in PPE mode
When washing gas cylinders, heavily soiled loads should be selected.
WD-12
P1=Lightly soiled items (e.g. trays and glassware)
P2=Normal load
P3=Heavily soiled items
31
Rev. 2.0 (201706)