Read Tag Status; Initialize The Tag - Siemens SIMATIC RF310M Operating Instructions Manual

9.3.5.6

Read tag status

You can read and display the status data of the transponder via "Tag > Tag Status".
The following tag status information is displayed here:
● Tag ID
● FRAM memory size in bytes
● Lock bit register (8-bit binary value)
● ASIC version
Figure 9-14
9.3.5.7

Initialize the tag

The "Init Tag" function is used to overwrite the complete data area of a tag with a specific
value.
If you have activated the "Edit Tag" function in the RF-MANAGER, you can execute this
function using "Tag > Init Tag".
Prerequisite
A writable memory area is selected in the data editor:
● The memory area of the complete tag if the "Complete" check mark is selected in the
● The memory area set in the fields "Address" and "Length".
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
Reading the tag status
data editor; or
RF-MANAGER RF310M software
9.3 Application mode "Mobile"
79