Write Tag Data - Siemens SIMATIC RF310M Operating Instructions Manual

RF-MANAGER RF310M software
9.3 Application mode "Mobile"
Figure 9-8
The data and memory areas are read which are currently set in the data editor. [see "Current
area" in Chapter Setting of memory areas and address ranges for read and write operations
(Page 70).]
9.3.2.5

Write tag data

You can write tag data in the data editor using the "Write" button or <CTRL+W>.
The tag ID has a green background just like with the read operation. [See Read tag data
(Page 71).]
If you have previously read data from a tag with the reader, these values will be written to the
tag with the next write operation.
Figure 9-9
The data and memory areas are read which are currently set in the data editor. [See Setting
of memory areas and address ranges for read and write operations (Page 70).]
72
"Read" button
"Write" button
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
SIMATIC RF310M Mobile Reader