Overview Of Functions - Siemens SIMATIC RF310M Operating Instructions Manual

RF-MANAGER RF310M software
9.3 Application mode "Mobile"
9.3.3

Overview of functions

After start-up of the RF-MANAGER RF310M application, the screen for scanning tags
appears on the display. You can then scan tags or call a function from the menu. You can
find out from the following table which functions are available in the respective application
mode.
Note
If you want to use the function "Edit Tag" in application mode "Mobile", you must activate this
in RF-MANAGER.
Function
File Open
Save Tag
Save Tag As
Exit
Tag Scan
Read Data
- Read <CTRL+R>
- Write <CTRL+W>
Write OTP
Tag Status
Init Tag
Tools Password
Reader Status
Language
Settings
Help About RF310M
74
Application mode
Remote Mobile
Standard Edit Tag
- -
- -
- -
X X
X X
- -
- -
- -
- -
X X
X X
X X
- -
X X
Description
X Load file from the integral PSION "Flash Disk"
directory to the work memory.
X Save read-in tag data to the "Flash Disk" directory.
X Save read-in tag data to the "Flash Disk" directory.
X Exit application
X Read tag ID
X Read tag data, write tag
X Lock data areas on the tag
X Tag status display
X Initialize data areas on the tag
X Change password for the application
X Information about the reader
X Set the menu language
X Define tag area for reading/writing
Specify format (editor, data, address, length)
X Manufacturer data
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
SIMATIC RF310M Mobile Reader