The Functions In The "File" Menu; Overview Of File Functions; Open; Save Tag / Save Tag As - Siemens SIMATIC RF310M Operating Instructions Manual

9.3.4

The functions in the "File" menu

9.3.4.1

Overview of file functions

The following options are available in the "File" menu:
● Open
● Save Tag
● Save Tag As
● Exit
9.3.4.2

Open

The function is available in the application mode "Mobile" when "Edit Tag" has been
activated in RF-MANAGER.
You can load a file via "File > Open" if the file was saved beforehand with the command "File
> Save" or if it was transferred from the PC to the "Flash Disk" directory of the SIMATIC
RF310M (also see Data transfer between the PC and reader (Page 88)).
All the files of the "Flash Disk" folder are displayed. You can select the desired file via the
touch screen or by entering the filename under "Name" and <OK>.
9.3.4.3

Save Tag / Save Tag As

The functions are available in the application mode "Mobile" when "Edit Tag" has been
activated in RF-MANAGER.
Via "File > Save", you can save data currently displayed in the editor of the reader to a file on
the SIMATIC RF310M. If you select "Save", the current file will be replaced; if you select
"Save Tag As", you can select a new directory or a new file name.
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
Figure 9-12 The "File" functions
RF-MANAGER RF310M software
9.3 Application mode "Mobile"
75