Exit; The Functions In The "Tag" Menu; Overview Of Tag Functions - Siemens SIMATIC RF310M Operating Instructions Manual

RF-MANAGER RF310M software
9.3 Application mode "Mobile"
The filename can be up to 100 (alphanumeric) characters in length. XML format is used
automatically for saving. Also refer to the Chapter "File storage on the SIMATIC RF310M
(Page 87)" as well as "Organization of the .XML files in the Flash Disk directory (Page 91)".
9.3.4.4

Exit

You can exit the "RF-MANAGER RF310M" program via "File > Exit". You then reach the
WinCE operating system level of the PSION Workabout Pro. You require the password
relevant to the application for this, if you have previously assigned one.
Note
A connection to RF--MANAGER is established as long as the "RF--MANAGER RF310M"
software is running on the SIMATIC RF310M. On exiting, this connection is closed down.
9.3.5

The functions in the "Tag" menu

9.3.5.1

Overview of tag functions

The following tag functions are available that you can select in the menu via "Tag":
● Scan
● Read Data
● Write OTP
● Tag Status
● Init Tag
Figure 9-13
76
The tag functions
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
SIMATIC RF310M Mobile Reader