Setting Of Memory Areas And Address Ranges For Read And Write Operations - Siemens SIMATIC RF310M Operating Instructions Manual

RF-MANAGER RF310M software
9.3 Application mode "Mobile"
9.3.2.3

Setting of memory areas and address ranges for read and write operations

Selection of memory area
In the data editor, select the memory area of the tag for which you wish to carry out a read or
write operation.
Figure 9-5
Setting of address and length of memory area
In the data editor, set the start address and length of the memory area for which you wish to
carry out a read or write operation.
If you have selected the user area, you must specify its length in the field "Length of user
area". You can also call the length of the tag-specific user area using "Tag status".
Figure 9-6
70
Selection of memory area
Address and length of memory area
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
SIMATIC RF310M Mobile Reader