Read Tag Data - Siemens SIMATIC RF310M Operating Instructions Manual

SIMATIC RF310M software
8.3 Edit tag data
Carrying out a read/write operation for the complete memory area
If all memory areas of the tag are to be completely read or written together, set the check
mark for "Complete". With this function you can display the complete size of the selected
memory area.
If the check mark is set for "Complete", "Read all" and "Write all" are displayed on the
buttons.
Figure 8-6
See also
The data editor (Page 34)
8.3.4

Read tag data

You can scan tags and read tag data using the "Read" button in the data editor.
The tag ID is displayed in the editor underneath the menu bar. It has a green background
when reading a tag for the first time. If you work further with the same tag, the green
background disappears.
As soon as you scan a different tag, its ID also has a green background. The green
background thus indicates if a different tag is being edited.
40
"Complete" check mark
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
SIMATIC RF310M Mobile Reader