● Effect of the "Data" settings:
Hex
● Effect of the settings under "Address" and "Length"
Display in the
editor
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
Hexadecimal, decimal or ASCII number format
"Hex" or "Dec" presentation format can be recognized in the "Address" and "Length" lines
in the data editor.
Dec
When the check mark is missing, you can also enter decimal data here. If you
subsequently set the check mark, the data will be converted into hexadecimal format.
Depending on the format setting, the values will be changed in the editor.
You can see in the data editor whether "Hex" or "Dec" is activated; for Hex format, "0x" is
shown for "Address" and "Length":
"Hex" check mark not activated
RF-MANAGER RF310M software
9.3 Application mode "Mobile"
ASCII
"Hex" check mark activated
85