Advanced Functions; File Storage On The Simatic Rf310M - Siemens SIMATIC RF310M Operating Instructions Manual

Advanced functions

10.1

File storage on the SIMATIC RF310M

Storing the read tag data using the data editor
The data read from the tag are automatically stored on the reader to a file with the name
"READ.XML" in the "Flash Disk" directory.
Every subsequent read command overwrites this file.
Length of the written tag data
When writing to the tag, the write data are written from the Editor to the tag and also to the
"Flash Disk" directory of the reader under the name "WRITE.XML". Every subsequent write
command overwrites this file.
Display Files
The function "File > Open" shows all files with the extension ".XML". You can select one of
these. This file is then loaded into the Editor. The file is not saved with the name READ.XML
or WRITE.XML.
Save files
The function "File > Save / Save Tag As" saves the data from the Editor to a file with the
extension ".XML" in the "Flash Disk" directory of the reader. You can enter any name with 1
to 100 alphanumeric characters.
Note
Identification of modified data is retained in the XML file
If you read the data from the tag, modify them in the Editor and then save them, the modified
data are saved to the .XML file. The identification of the modified data is also retained in the
XML file; i.e. if you open the file again in the data editor, the modified data again have a
green background.
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
10
87