Open File; Save Tag / Save Tag As; Exit File - Siemens SIMATIC RF310M Operating Instructions Manual

SIMATIC RF310M software
8.4 The functions in the "File" menu
8.4.1

Open file

You can load a file via "File > Open" if the file was saved beforehand with the command "File
> Save" or if it was transferred from the PC to the "Flash Disk" directory of the SIMATIC
RF310M (also see Data transfer between the PC and reader (Page 88)).
All the files of the "Flash Disk" folder are displayed. You can select the desired file via the
touch screen or by entering the filename under "Name" and <OK>.
8.4.2

Save Tag / Save Tag As

Via "File > Save Tag/Save Tag As", you can save data currently displayed in the editor of the
reader to a file on the SIMATIC RF310M. If you select "Save", the current file will be
replaced; if you select "Save Tag As", you can select a new directory or a new file name.
The filename can be up to 100 (alphanumeric) characters in length. XML format is used
automatically for saving. Also refer to the Chapter "File storage on the SIMATIC RF310M
(Page 87)" as well as "Organization of the .XML files in the Flash Disk directory (Page 91)".
8.4.3

Exit file

You can exit the SIMATIC RF310M program via "File > Exit". You then reach the WinCE
operating system level of the PSION Workabout Pro. You require the password relevant to
the application for this if you have previously assigned one.
44
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
SIMATIC RF310M Mobile Reader