The Functions In The "Tag" Menu; Write Otp - Siemens SIMATIC RF310M Operating Instructions Manual

8.5

The functions in the "Tag" menu

The following tag functions are available that you can select in the menu via "Tag":
● Write OTP
● Tag Status
● Init Tag
● Tag Type
8.5.1

Write OTP

Using the function "Write OTP", you can write once to the OTP area of a tag that is at a
sufficient distance from the reader.
The "Write OTP" function is non-reversible.
Please note that the OTP memory area can only be written to once. It is not possible to
change the values in the OTP area of a tag at a later time.
Requirements
The memory area "OTP EEPROM" is selected in the data editor.
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
Figure 8-12 Tag functions
CAUTION
SIMATIC RF310M software
8.5 The functions in the "Tag" menu
45