Password For The Simatic Rf-Manager Rf310M Application - Siemens SIMATIC RF310M Operating Instructions Manual

9.3.6.2

Password for the SIMATIC RF-MANAGER RF310M application

As an option, you can assign a password for the SIMATIC RF-MANAGER RF310M
application.
Select "Tools > Password" from the menu.
Figure 9-16
1. Enter a password with up to 8 characters under "New Password".
2. Then enter the password again under "Confirm password".
3. Select the "OK" button.
The password is now set. All write functions to a tag as well as exiting of the software are
now protected by this password.
Password prompt
If you then wish to perform a write function, you will be prompted to enter the appropriate
password. You only have to enter the password once in the case of several consecutive
write commands. It will remain valid for 5 minutes after the last write function is executed.
This password is also required to exit the application.
Deactivation of password
If you have assigned a password and then wish to deactivate it, leave the "New Password"
and "Confirm Password" fields empty, and confirm using the "OK" button.
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
Password
RF-MANAGER RF310M software
9.3 Application mode "Mobile"
81