Starting The Simatic Rf310M Software; Edit Tag Data; The Data Editor - Siemens SIMATIC RF310M Operating Instructions Manual

SIMATIC RF310M software

8.2 Starting the SIMATIC RF310M software

8.2 Starting the SIMATIC RF310M software
Start the software by double-clicking on the RF310M icon on the desktop.
Figure 8-1
During start-up of the software, a Stop symbol is displayed at the bottom right in the display
of the SIMATIC RF310M:
You cannot use the application as long as the Stop symbol is displayed.
The device is ready for use as soon as the red Stop symbol at the bottom right of the display
has disappeared.
Note
If you have activated "Supervisor" mode, you can also start the software via "Start >
Programs > RF310M".
8.3

Edit tag data

8.3.1

The data editor

You can edit the transponder data in the editor window in hexadecimal, ASCII or decimal
format. You can toggle between the two in the "Tools > Settings" menu (see Settings
(Page 54)).
34
Desktop icon RF310M
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
SIMATIC RF310M Mobile Reader