Software overview
7.1
Software applications
Two software applications are available to you in SIMATIC RF310M:
● The RF310M software of the standalone product SIMATIC RF310M
● The software "RF-MANAGER"
7.2
Overview of possible applications
You can use the SIMATIC RF310M device in different ways:
As a standalone product or in combination with SIMATIC RF-MANAGER
Interfacing to SIMATIC RF-MANAGER with the software "RF-MANAGER"
Application mode "Remote"
RF310M behaves like a stationary reader
•
The acquired data are only displayed and
•
transferred to RF-MANAGER
The acquired data cannot be modified
•
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
The RF310M application program is primarily intended for use in the service and test
fields for reading and writing tags in RFID applications.
With the RF-MANAGER application software, the SIMATIC RF310M device becomes an
integral component of that of SIMATIC RF-MANAGER.
Data acquisition for the "RF-MANAGER" software is configured in the engineering system
of SIMATIC RF-MANAGER.
The software serves to acquire data and transfer it to SIMATIC RF-MANAGER.
Application mode "Mobile"
The acquired data is acknowledged
•
before being transferred to RF-
MANAGER. Data that has been
incorrectly scanned can be deleted.
All the tag data from the RFID chip can
•
also be displayed or edited depending
on the configuration in the engineering
system.
7
Standalone product with
the RF310M software
Acquisition of tag data
•
All editing functions are
•
permitted.
31