Siemens SIMATIC RF310M Operating Instructions Manual page 56

SIMATIC RF310M software
8.6 The functions in the "Extras" menu
● Effect of the "Data" settings:
Hexadecimal, decimal or ASCII number format
"Hex" or "Dec" format can be recognized in the "Address" and "Length" lines in the data
editor.
Hex
● Effect of the settings under "Address" and "Length"
When the check mark is missing, you can also enter decimal data here. If you
subsequently set the check mark, the data will be converted into hexadecimal format.
Depending on the format setting, the values will be changed in the editor.
You can see from the data editor whether "Hex" or "Dec" is activated; for Hex format, "0x"
is shown for "Address" and "Length":
Display in the
editor
56
Dec
"Hex" check mark not activated
ASCII
"Hex" check mark activated
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
SIMATIC RF310M Mobile Reader