Functions Of The Instructions - Siemens SIMATIC Ident Function Manual

Description

2.2 Functions of the instructions

2.2 Functions of the instructions
The "Ident_Profile" instruction serves as the communication interface between an Ident
device (e.g. RFID 181EIP) and the user program. The instruction supports the following
functions:
● Configuration
● Editing commands
● Reading and writing of data
● Diagnostics
The Ident profile is a single complex instruction containing all the commands and functions
for RFID systems and code reader systems. The "Param_RFID181EIP" (or
"Param_RF68xR") instruction is used to configure the Ident device during startup.
The size of the data buffers "TXREF" and "RXREF" can be variable. You can specify the
length manually.
10
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 01/2019, C79000-G8976-C410-03