General Safety Information And Protective Measures - Leuze electronic MSI 400 Operating Instructions Manual

2.4

General safety information and protective measures

Note the safety information and protective measures!
Note the following points in order to ensure proper use of the MSI 400 safety control.
• Please follow the standards and guidelines valid in your country when installing and using the MSI 400
safety control.
• The national/international legal regulations apply to the installation and use of the safety control as well
as for the commissioning and repeated technical testing, particularly the following:
• Machinery Directive 2006/42/EC
• EMC Directive 2014/30/EU
• Work Equipment Directive 2009/104/EC
• Low-Voltage Directive 2014/35/EU
• The accident prevention regulations/safety rules
• RoHS (Restriction of Hazardous Substances) Directive 2011/65/EU
• Manufacturers and operators of a machine on which a MSI 400 safety control is being used are re-
sponsible for coordinating with the proper authorities with regard to applicable safety guidelines/rules
and complying with these.
• The notices, particularly the test notices, must be observed without fail.
Further information: Requirements for electric installation [chapter 7.1]
The tests must be conducted by qualified persons or by those who are personally authorized and com-
missioned to do so and must always be fully documented at all times by a third-party.
• This manual must be provided to the operator of the machine on which the MSI 400 safety control is
being used. The machine operator must be trained by qualified persons and is required to read this
manual.
Leuze electronic
WARNING
MSI 400
Safety
11