Leuze electronic MSI 400 Operating Instructions Manual page 100

Error No. Error type Logbook message
10100010 Error
10100011 Error
10100012 Error
10100013 Error
10100015 Error
10100016 Error
10100017 Error
10100018 Error
10200002 Error
10200003 Error
10200004 Error
10200005 Error
10200006 Warning
10200007 Error
10200008 Error
10200009 Error
1020000A Info
1020000B Warning
10300001 Error
10300002 Error
10300003 Error
10400001 Error
Leuze electronic
The message from the controller is
corrupt.
The message to the controller
could not be processed.
The controller could not respond
positively to the request.
The maximum number of repeated
requests is exceeded.
Connection cannot be set up to
the controller.
The password for the user to be
logged on is invalid.
The controller could not adopt the
desired state.
The station's memory card is not
inserted.
The project on the control is in-
valid.
The verification status of the pro-
ject and controller are different.
The PC project and the project on
the controller could not be syn-
chronized.
The current user does not have
authorization to communicate with
the controller.
Connection was disconnected.
The project on the controller does
not match the module configura-
tion.
The controller reports an error.
The controller reports a deviating
CRC in the project file.
The permissible waiting time for
the operation was exceeded.
The verification has been interrup-
ted.
The faulty project file is still in the
station and must be replaced by
the updated project file.
Please reconnect and load the up-
dated project on the station.
The data of the logic analyzer
could not be saved.
The data of the logic analyzer
could not be loaded.
Input/output was not found.
The log messages could not be
saved.
MSI 400
System behavior Remedy
Separate connec- Support request
tion
Separate connec- Repeat
tion support request
Remains connected Repeat
support request
Separate connec- Repeat
tion support request
No connection Check connection
support request
Remains connected Check password
Remains connected Repeat
support request
Separate connec- Insert valid SD card
tion
No connection Transfer a new
valid project
No connection Reverify the project
No connection Disconnect and re-
connect
support request
No connection Redefine the user
rights
Remains connected Adjust hardware or
project
- Support request
- Repeat of
Support request
work step
- Repeat
support request
- Repeat
support request
- Update the device
with the repaired
project
- Check Windows
user rights
- Repeat
support request
- Support request
- Check Windows
user rights
Appendix
100