Leuze electronic MSI 400 Operating Instructions Manual page 39

• contact monitor for universal presses, cycle mode, press setup, single stroke monitoring, press
automatic mode)
• Input override at a function block for muting
• Input reset at a function block for valve monitoring
• Resetting of inputs to zero and setting at a start value on an event counter function block
NOTICE
Ä When using an odd-numbered test output, odd-numbered inputs must be used, while even-
i
numbered inputs must be used when using an even-numbered test output.
Ä You have to use the test outputs of the module at which the device to be tested has been
connected.
Report function in the software
After project planning, you will receive a report in the MSI.designer software with the following content (Ac-
tivate: Tab bar | View Report):
• Logic report
• List of parts
• Wiring information
Tab. 4.1: Excerpt from exemplary documentation in the MSI.designer software
Leuze electronic MSI 400
Connecting devices
39