Controller Module Msi 410; Description; Display Elements, Interfaces, And Terminal Description - Leuze electronic MSI 400 Operating Instructions Manual

3.4

Controller module MSI 410

3.4.1

Description

The MSI 410 controller module is a central processing unit for the entire system in which all of the signals
are monitored and logically processed according to the configuration stored in the MSI-SD-CARD program
removable storage. The module has safe inputs and outputs as well as test signal outputs. The system out-
puts are switched as a result of the processing. The internal safety bus in this case serves as a data inter-
face.
Module versions
In addition to the basic version, there is the MSI 410.F50 compact module.
It has additional functions for:
• Press control
• Motion detection (standstill monitor)
3.4.2

Display elements, interfaces, and terminal description

8 input LEDs
LED PWR/EC
MS LED
CV LED
8 input LEDs
4 output/
4 input LEDs
Fig. 3.3: MSI 410 display elements
Tab. 3.3: 4 LED displays
LED
PWR/EC
MS
CV
Input LED I1 to I20
Output LED Q1 to Q4
Tab. 3.4: MSI 410 pin assignment
Pin assignment
A1 24 V supply voltage for all modules, except for supply of outputs
A2 GND of supply voltage
I1 - I20 Safe, digital inputs
Q1 - Q4 Safe, digital outputs
B1 24 V supply voltage of outputs Q1 - Q4
T1 - T4 Test signal outputs
Leuze electronic
Mini-USB connection
SD slot for
MSI-SD-CARD
Meaning
Display of the supply voltage state
Display of an error through various Flashing codes [chapter
10.3.1]
Display of the Module state [chapter 10.3.1]
Display of the verification state of the Control project [chapter
10.3.1]
State display of the Inputs [chapter 10.3.1]
State display of the Outputs [chapter 10.3.1]
MSI 400
Product description
16