Description Of Menu-Network Functions - Ikegami HLM-960WR Operation Manual

HLM-960WR / 1760WR / 2460W

4-15 Description of MENU-NETWORK Functions

INPUT <NETWORK>
VIDEO REMOTE NO
AUDIO IPv4 SETTING
TC/WFM/VSC RETURN
MARKER
CAPTURE
! ! ! ! ! ! ! ! ! ! ! !
UTILITY SETTING REQUIRES REBOOT
! ! ! ! ! ! ! ! ! ! ! !
FUNC.SW
P.REMOTE
UMD/IMD
USB MEMORY
C.CAPTION
NETWORK
RESET
INFO
EXIT
REMOTE NUMBER
Set the ID number within the range from 01 to 99
when remote control is performed on a network.
Default setting is 01.
IP ADDRESS
Set the IP ADDRESS.
Setting range: 0 ~ 255. 0 ~ 255. 0~255. 1~254
SUBNET MASK
Set the SUBNET MASK.
Setting range: 0 ~ 255. 0 ~ 255. 0~255. 0~255
DEFAULT GATEWAY
Set the DEFAULT GATEWAY.
Setting range: 0 ~ 255. 0 ~ 255. 0~255. 0~255
01
EXECUTE
Set the transmission speed and method.
100M FULL
100M HALF
10M FULL
10M HALF
Default setting is AUTO.
Notice:When the settings of
the monitor should be rebooted. (After reboot, the
changed setting will be effective.)
Please contact us if you'd like the manual regarding
the control by Ethernet.
- 54 -
IPv4 SETTING
IP ADDRESS 192. 168. _ _1. 100
SUBNET MASK 255. 255. 255. _ _0
DEFAULT GATEWAY 192. 168. _ _1. 254
SPEED DUPLEX AUTO
RETURN
SPEED DUPLEX
Setting Speed and method
AUTO Automatic negotiation
100Mbps
100Mbps half duplex
10Mbps full duplex
10Mbps half duplex
full-duplex
~ are changed,