Ikegami HLM-960WR Operation Manual page 68

HLM-960WR / 1760WR / 2460W
Variable range : -60.0 +60.0
Default setting is 0.0.
CONT CONTRAST
Used to set the white level.
Variable range : 0.0 120.0 WIDE : 0.0 200.0
R.BKG R.BACKGROUND
Used to set the black balance (red component) at
dark level.
Variable range : -25.0 +25.0
Default setting is 0.0.
G.BKG G.BACKGROUND
Used to set the black balance (green component)
at dark level..
Variable range : -25.0 +25.0
Default setting is 0.0.
B.BKG B.BACKGROUND
Used to set the black balance (blue component)
at dark level..
Variable range : -25.0 +25.0
Default setting is 0.0.
R.GAIN
Used to set the white balance (red component)
at bright level.
Variable range : 0.0 200.0
Default setting is 100.0.
G.GAIN
Used to set the white balance (green component)
at bright level.
Range : 0.0 200.0
Default setting is 100.0.
B.GAIN
Used to set the white balance (blue component)
at bright level.
Range : 0.0 200.0
Default setting is 100.0.
HUE
Used to set the hue (only for NTSC signals).
Variable range : -17.5 +17.5
Default setting is 0.0.
Copying of file data
PRESET COPY FILE
FROM D65
TO FILE
EXECUTE
RETURN
(a) Select the source file (D65, D93, FILEx [x: 1 to 8])
using the RE.
(b) Select the destination for the file (FILEx [x: 1 to
8], FILE1 - FILE8) using the RE.
* When FILE1 - FILE8 are selected, data is cop-
ied to FILE1 through FILE8.
(c) When the RE is pressed, the copy confirmation
message appears. To copy, press the RE again.
If not, press the ESC switch.
- 58 -