Description Of Menu-Tc/Wfm/Vsc Functions - Ikegami HLM-960WR Operation Manual

HLM-960WR / 1760WR / 2460W
4-5 Description of MENU-TC/WFM/SC Functions
* TC is compatible only with SDI signal (except SD-SDI).
* WFM / VSC is supported only for VBS and SDI signals.
INPUT <TC/WFM/VSC>
VIDEO TC SELECT
AUDIO DIMMER
SIZE
TC/WFM/VSC
MARKER WFM DISPLAY
CAPTURE DIMMER
UTILITY SIZE
FUNC.SW POSITION
P.REMOTE COLOR
UMD/IMD VECTOR SCOPE
DIMMER
USB MEMORY
C.CAPTION MAGNIFICATION
NETWORK SCALE
RESET POSITION
INFO COLOR
EXIT RETURN
Setting the SDI TC display ON/OFF
Used to turn ON or OFF the VITC/LTC display
multiplexed with 3G/HD-SDI signal.
This function can be assigned to a function
switch on the front panel.
Default setting is OFF.
Setting of SDI TC display brightness
Used to set the SDI TC display brightness in
three levels, LOW, MID and HIGH.
Default setting is MID.
Setting of SDI TC display size
Used to select the SDI TC display size, NORMAL
or LARGE.
Default setting is NORMAL.
Setting of waveform display ON/OFF
Used to turn ON or OFF the waveform display of
luminance signal.
This function can be assigned to a function
switch on the front panel.
Default setting is OFF.
Setting of waveform display brightness
Used to set the waveform display brightness in
three levels, LOW, MID, HIGH and HIGH(M).
HIGH(M) mode transmits with a picture and
displays it.
Default setting is HIGH.
OFF
MIDDLE
NORMAL
OFF
HIGH(M)
NORMAL
RIGHT
WHITE
OFF
HIGH(M)
×1
100%
RIGHT
WHITE
Setting of waveform display size
Used to set the luminance signal waveform dis-
play size, NORMAL or SMALL.
The SMALL setting displays the waveform half as
tall as in the NORMAL setting.
Default setting is NORMAL.
Setting of waveform display position
Used to set the waveform display position, RIGHT,
CENTER or LEFT.
In the case of "RIGHT" setting, if the PinP function
is set to "Window (R)" mode, the waveform display
is displayed on the left side of the sub screen.
In "LEFT" setting, when the PinP function is set
to "Window (L)" mode, the waveform display is
displayed on the right side of the sub screen.
Default setting is RIGHT.
Setting the waveform display color
Used to set the waveform display color, GREEN
or WHITE.
Default setting is WHITE.
Setting the VECTOR SCOPE display ON/OFF
Used to turn on or off the VECTOR SCOPE dis-
play.
This function can be assigned to a function
- -
22