Ikegami HLM-960WR Operation Manual page 60

HLM-960WR / 1760WR / 2460W
MPU FIRMWARE
When updating the MPU firmware, tick the
check box here.
It can be updated simultaneously with FPGA.
The update time depends on USB performance.
It takes approximately 0.5 minutes to 1 minute
to update the MPU.
Make sure that the following files are in the root
of the USB memory and follow the procedure in
item .
After update, check whether version update was
done at MENU-INFO.
FILE NAME 1760v
Identification information
HLM-960WR : 960_v
HLM-1760WR : 1760v
HLM-2460WR : 2460v
Version information
Example 1760v105.bin
FPGA FIRMWARE
When updating the FPGA, tick the check box
here.
It can be updated simultaneously with MPU.
The update time depends on USB performance.
It takes approximately 2 minutes to 4 minutes to
update the FPGA.
Make sure that the following files are in the root
of the USB memory and follow the procedure in
item .
After version update, check whether version
update was done at MENU-INFO.
FILE NAME 60 _ _ f
Identification information (fixed to 60_ _f)
Version information
Example 60_ _f105
Extension (f1b)
. bin
Ver1.05
. f1b
Ver1.05
- -
50
Execution of download
Execute the updating of the item or items selected
by ticking under item .
Please refer to "How to update MPU from USB
memory" for the method of updating MPU.
Please refer to "How to update FPGA from USB
memory" for the method of updating FPGA.
When updating both MPU and FPGA simultane-
ously, the monitor will update the FPGA first, and
even if an error should occur, then update the
MPU next.