Ikegami HLM-960WR Operation Manual page 38

HLM-960WR / 1760WR / 2460W
Resetting the data
Turn the RE counter-clockwise while "DATA(X
Y)" in is flashing to reset data that has been
set to change to unregistered status ( ).
In the case of using a mouse, scroll wheel up to
unregister.
Coordinate reference point
This 1920 x 1080, Full-HD panel has a pixel
reference point (0001, 0001) at the top left of the
screen. The pixel at the bottom right of the
screen is preset as the coordinates (1920, 1080).
X axis
Y axis
* Regarding HLM-2460W, the pexel at the bottom
right of the screen is preset as the coordinates (1920,
1200).
Marker lines and coordinate values
There are 4 line widths for the user markers.
However, the coordinate for the start point and
that for the end point are different by 3 pixel.
Pixel position in the coordinate for the "start point"
Line width: 2 pixels
Pixel position in the coordinate for the "end point"
Accordingly, in drawing a horizontal line, the
Y-direction address has a coordinate value with
3pixel added, as shown below.
Pixel position (X, Y) in the coordinate for the "start point"
Pixel position (X+a, Y+3) in the coordinate for the "end point"
When a vertical line is drawn, the X-axis ad-
dress has a coordinate value with 3 pixel added,
as shown below.
Pixel position (X, Y) in the coordinate for the "start point".
Pixel position (X+a, Y+3) in the coordinate for the "end point".
- -
28