Ikegami HLM-960WR Operation Manual page 35

ASPECT Displaying the aspect marker
preset in Item
C.CROSS Cross marker.
CROSS5 5-split crosshatch pattern.
CROSS10 10-split crosshatch pattern.
This function can be assigned to a function switch
on the front panel.
Default setting is SAFETY.
SAFETY FRM + SAFE
C.CROSS CROSS5
Setting the safety marker area (at 4:3 aspect ratio)
Used to set the safety marker area in the 80%-
99% range with 1% increments at 4:3 aspect
ratio.
Default setting is 80% (safety area).
Setting the type of aspect marker (at 4:3 aspect
ratio)
Used to select the type of aspect marker from
13:9, 14:9, 15:9 and 16:9
Default setting is 16:9 marker.
Setting the aspect marker display mode
Used to set the aspect marker display mode.
MARKER Displaying the marker only.
SHADOW Displaying the shadow only
MRK+SHD Displaying both the marker
and shadow
Default setting is MARKER+SHADOW.
MARKER SHADOW
.
ASPECT
CROSS10
Active screen area (4:3)
100% area
Variable from 80% to 99%
(1% increments)
at 4:3 aspect ratio.
Active screen area (4:3)
Aspect marker
[ 13:9 / 14:9 / 15:9 / 16:9 ]
MRK+SHD
- -
25
HLM-960WR / 1760WR / 2460W
Setting the aspect marker shadow level
Used to set the contrast level of the aspect marker
shadow, when displayed.
Settings: 0%, 20%, 40% and 60%
Default setting is 40%.
Setting the center marker ON(TYPE-A/B)/OFF
Used to turn on and off the center cross marker.
There are two kinds of center markers TYPE-A or
TYPE-B.
Default setting is OFF.
OFF TYPE-A
Setting the marker display level
Used to set the marker display level.
Settings: 20%, 40%, 60%, 80% and 100%
Default setting is 80%.
Setting the marker display color
Used to set the marker display color.
* The marker is displayed in the color preset on
the marker menu.
Settings White, yellow, cyan, green, magenta,
red and blue
Default setting is white.
Setting the user marker display ON/OFF
Used to turn on and off the user marker display.
This function can be assigned to a function
switch on the front panel.
Default setting is OFF.
Selecting each scene of user markers and set-
ting the scene names
The user markers can be set for up to 10 scenes;
you can select from SCENE 1 to SCENE 10.
SCENE10
SCENE2
SCENE1
TYPE-B