Data 3 Rs-485 Pin Functions - Ikegami HLM-960WR Operation Manual

HLM-960WR / 1760WR / 2460W
Additional user-set functions
Pin No. Function
User setting SHADOW0 on
User setting SHADOW20 on
User setting SHADOW40 on
User setting SHADOW60 on
User setting CH-C on
User setting CH-D on
User setting HDMI on
User setting PinP on
User setting U.MRK SCENE01
User setting U.MRK SCENE02
User setting U.MRK SCENE03
User setting U.MRK SCENE04
User setting U.MRK SCENE05
User setting U.MRK SCENE06
User setting U.MRK SCENE07
User setting U.MRK SCENE08
User setting U.MRK SCENE09
User setting U.MRK SCENE10
* The functions of pins other than 1 are freely user-settable in the MENU.
* When SCENE 01 ~ 10 of USER MARKER is set with multiple pins, lower numbers are given priority.
For example, when both SCENE 01 and SCENE 03 are ON, SCENE 01 takes precedence
Data3 RS-485 Pin Functions
* For the connection between the monitor, use straight LAN cable.
Female terminal
External Assignment for Function
Connect to Pin 1 for running with shadow level 0% (black).
* Priority is given to this pin function if any other shadow setting pin is pressed at
once.
Connect to Pin 1 for running with shadow level 20%.
Connect to Pin 1 for running with shadow level 40%.
Connect to Pin 1 for running with shadow level 60%.
Connect to Pin 1 to select C channel in the SDI input mode.
Pin 15 is also connected to Pin 1.
* When CH-C is OPEN, A channel will be selected.
Connect to Pin 1 to select D channel in the SDI input mode.
Pin 15 is also connected to Pin 1.
* When CH-D is OPEN, A channel will be selected.
Connect to Pin 1 to select the HDMI input mode.
* When HDMI and SDI are open, the analog composite will be selected.
Connect to Pin 1 to set PinP to on.
Connect to Pin 1 to set USER MARKER (SCENE01) to on.
Connect to Pin 1 to set USER MARKER (SCENE02) to on.
Connect to Pin 1 to set USER MARKER (SCENE03) to on.
Connect to Pin 1 to set USER MARKER (SCENE04) to on.
Connect to Pin 1 to set USER MARKER (SCENE05) to on.
Connect to Pin 1 to set USER MARKER (SCENE06) to on.
Connect to Pin 1 to set USER MARKER (SCENE07) to on.
Connect to Pin 1 to set USER MARKER (SCENE08) to on.
Connect to Pin 1 to set USER MARKER (SCENE09) to on.
Connect to Pin 1 to set USER MARKER (SCENE10) to on.
Pin No. IN terminal
TXD
2 TXD
3 RXD
4 GND
5 GND
6 RXD
7 NC
8 NC
- 78 -
OUT terminal
TXD
TXD
RXD
GND
GND
RXD
NC
NC