Ikegami HLM-960WR Operation Manual page 16

HLM-960WR / 1760WR / 2460W
b) Long Press
If the MENU display is OFF, a long press of the
RE switch displays the MENU. If the MENU is
displayed, a long press of the RE switch regis-
ters the settings and turns off the MENU dis-
play.
INPUT <INPUT>
VIDEO VIDEO SOURCE
AUDIO SOURCE SELECT
TC/WFM/VSC SDI CH LOCK
MARKER HDMI(DVI)FORMAT
CAPTURE RGB RANGE
UTILITY PinP
FUNC.SW MODE
P.REMOTE SUB DISPLAY
UMD/IMD TIMING MODE
USB MEMORY SDI CH-C/D MODE
C.CAPTION
NETWORK
RESET
INFO
EXIT TEST PATTERN
MIX TEST SIGNAL
RETURN
c) Rotating
Rotate the RE switch while the MENU is dis-
played to select items.
This switch is also used for drawing USER
MARKERS, setting the WIPE area, and varying
data.
INPUT LED
These LEDs turn on to indicate the input signal
that currently selected.
All LEDs turn off when a TEST signal is dis-
played.
F1 switch
Press this switch to select an item preset in the
MENU-FUNC.SW-FUNCTION-MODE.
For presettable items, refer to "4-10. Description
on MENU-FUNC. SW Functions"
F2 switch
Press this switch to select an item preset in the
MENU-FUNC.SW-FUNCTION-MODE.
For presettable items, refer to "4-10. Description
on MENU-FUNC. SW Functions"
F3 switch
Press this switch to select an item preset in the
MENU-FUNC.SW-FUNCTION-MODE.
For presettable items, refer to "4-10. Description
on MENU-FUNC. SW Functions"
F4 switch
Press this switch to select an item preset in the
SDI CH-A
EXECUTE
OFF
RGB
AUTO
OFF
Side by Side
SDI CH-B
SYNCRONOUS
OUT AB
CH-A
CH-B
CH-C
CH-D
GRAY SCALE
EXECUTE
MENU-FUNC.SW-FUNCTION-MODE.
For presettable items, refer to "4-10. Description
on MENU-FUNC. SW Functions"
MONO switch
This switch is pressed to make a color signal
monochrome.
MARKER switch
Press this switch to turn on/off markers.
* This function is disabled when an internal test
signal is displayed.
* This function does not work when a TEST signal
is selected.
APT switch
Press this switch to select the aperture function.
Set a correction amount on
MENU-VIDEO-APERTURE-LEVEL.
* The frequency of the aperture in PinP is fixed at
"HIGH".
* This switch is not available for the HLM - 960WR,
but it can be assigned to a FUNCTION switch.
SCREEN switch
Press this switch to display images in R, G or B
individually.
The switching between colors takes place as fol-
lows each time this switch is pressed.
"R only" "G only"
Screen"
* This switch is not available for the HLM - 960WR,
but it can be assigned to a FUNCTION switch.
CHROMA manual control
This control serves as a manual/preset switch
for chroma or a manual data variable control.
The control pops out when it is pressed and the
mode is changed to MANUAL.
BRIGHT manual control
This control serves as a manual/preset switch
for brightness or a manual data variable control.
The control pops out when it is pressed and the
mode is changed to MANUAL.
CONT manual control
This control serves as a manual/preset switch
for contrast or a manual data variable control.
The control pops out when it is pressed and the
mode is changed to MANUAL.
This control can be an allocation to BACK-
LIGHT according to the MENU-UTILITY-CONT
- 6 -
"B only" "Normal