Ikegami HLM-960WR Operation Manual page 9

case, the message "FAN ERROR!" will appear at the top of the screen.
The brightness of the backlight may be reduced in order to keep the internal temperature of the
motor from rising.
If the message "FAN ERROR!" is displayed, contact your dealer or Ikegami service desk.
Warranty
If the product should fail within one year from the date of delivery in spite of the proper use, the
manufacturer will repair the product free of charge. Even if the product is covered by the
warranty, however, the customer will be charged for labor and parts in the following cases.
1. Failure and damage caused by the following:
Improper use
Repair or modification performed by the customer
Transportation, transfer, falling, etc. after the purchase of the product
External factors such as natural disasters and over-voltage
2. LCD panel burn-in and aged deterioration (discoloration, burn-in, change in brightness,
increase in bright points and flashing, etc.)
3. Scratch or dirt on the entire surface of panel, or damage, discoloration, and deterioration of
the chassis
4. Replacement of the accessories and fuse
If no image comes out in spite of routine adjustment or if the product should seem to fail,
contact your dealer or Ikegami service desk.
Accessories
The monitor comes with the following accessories. Be sure that they are included.
1. Operation manual: 1 copy
2. Parallel remote connector: 1 set
3. Power cable: 1 pc.
* VGA, SVGA, XGA, SXGA, WXGA, UXGA and WUXGA are registered trademarks of International
Business Machines Corporation.
* VESA are registered trademarks of Video Electronics Standard Association.
* HDMI(High Definition Multimedia Interface) and HDMI logo are registered trademarks of HDMI
Licensing LLC.
* Specifications and external dimensions are subject to change without prior notice.
vii