Ikegami HLM-960WR Operation Manual page 24

HLM-960WR / 1760WR / 2460W
* If the main screen and sub screen are connected to
HDMI, the video of the sub screen will not be dis-
played
Side by Side
Window(R)
When WFM/VSC is displayed at "RIGHT" position,
the position of WFM/VSC is moved to the right
side of the sub screen and it is displayed not to
overlap.
Window(L)
When WFM/VSC is displayed at "LEFT" position,
the position of WFM/VSC is moved to the right
side of the sub screen and it is displayed not to
overlap.
Wipe (The ratio is displayed at the top of the
screen
Wipe(V) (The ratio is displayed at the top of the
screen
Default setting is Side by Side.
Setting the SUB DISPLAY
Setting the sub screen signal.
Default setting is SDI CH-B.
Setting the TIMING MODE
Set whether the two input signals are synchronized
or asynchronous signals.
SYNCHRONOUS
synchronized
ASYNCHRONOUS : When the two signals are
asynchronous
* In "ASYNCHRONOUS", the sub screen is delayed
by two frames.
Default setting is SYNCHRONOUS.
Setting the SDI CH-C/D input/output
SDI C / D can be set for input / output.
The following 10 settings are possible.
OUT AB
SDI CH-C CH-A/B output
SDI CH-D Disable
OUT A / IN
SDI CH-C CH-A output
SDI CH-D input
OUT A / OUT B
SDI CH-C CH-A output
SDI CH-D CH-B output
OUT B / IN
SDI CH-C CH-B output
SDI CH-D input
OUT B / OUT A
SDI CH-C CH-B output
SDI CH-D CH-A output
IN / IN
SDI CH-C input
SDI CH-D input
IN / OUT A
SDI CH-C input
SDI CH-D CH-A output
- -
14
: When the two signals are