Description Of Menu-P.remote Functions - Ikegami HLM-960WR Operation Manual

4-11 Description of MENU-P.REMOTE Functions

INPUT <P.REMOTE>
VIDEO PIN FUNCTION
AUDIO P2 :
TC/WFM/VSC P3 :
MARKER P4 :
CAPTURE P5 :
UTILITY P6 :
FUNC.SW P7 :
P.REMOTE P8 :
UMD/IMD P9 :
USB MEMORY P10:
C.CAPTION P11:
NETWORK P12:
RESET P13:
INFO P14:
EXIT P15:
RETURN
Setting the functions of the parallel remote
pins
Select the pre-assigned pin functions of the
parallel remote control or the individual us-
er-set functions.
* By default, the pre-assigned pin functions are
displayed beneath.
Setting the IP conversion mode
When USER is selected in
dividual pin functions. The available functions
are as follows.
CH-B selection of SDI CH-A/B
At this time, also set the
"SDI" terminal to ON (GND).
CH-C selection of SDI CH-A/C
(When CH-C is set for input)
At this time, also set the
"SDI" terminal to ON (GND).
CH-D selection of SDI CH-A/D
(When CH-D is set for input)
At this time, also set the
"SDI" terminal to ON (GND).
SDI selection of SDI input
HDMI selection of HDMI input
MONO selection of MONO
16:9 selection of SDTV aspect ratio
16:9
MARKER marker ON
SHADOW shadow ON at the level set in
MENU-MARKER-SHADOW
DEFAULT
CH-B
(blank)
G-TALLY
(blank)
CHROMA UP
MONO
(blank)
(blank)
ASPECT
(blank)
MARKER
SHADOW
R-TALLY
SDI
, set the in-
*
functions
and
MENU-MARKER-adjusted shadow level is
forced to go back to the level remotely preset.
* The functions of the following pins, which are
fixed, cannot be changed.
- -
41
HLM-960WR / 1760WR / 2460W
SHADOW0 shadow ON at shadow level
0% (Black)
SHADOW20 shadow ON at shadow level
20%
SHADOW40 shadow ON at shadow level
40%
SHADOW60 shadow ON at shadow level
60%
R-TALLY R tally ON
G-TALLY G tally ON
CHR UP CHROMA UP ON
UMARK* USER MARKER SCENE*
ON
PinP PinP ON
(blank) unassigned
SHADOW0 , SHADOW20
SHADOW40 and SHADOW60
Select two or more SHADOW settings at once,
SHADOW0 (Black) is given priority.
When any of these functions is turned ON, the
Pin 1 : GND
,